Suppression of dead zones between consecutive strips. Small pitch down to 2 mm. Build it twice for 4 lanes, and so on. The trick to build the dead strip: This sensor requires some track section rework, but the result is clever:
Special Ge and Si(Li) Detectors
Detector background counts were determined by measuring a nonradioactive sample slide for 52 h. Thus, all kinds of segmentation patterns are possible straight or curved strips, pixels, etc. Build it twice for 4 lanes, and so on. Energy spectra and detection efficiency were successfully measured for seven radionuclides. First Aop is used to detect any changes generated by a LRD or a photo diod.
Characterization of a double-sided silicon strip detector autoradiography system. - PubMed - NCBI
Germanium detectors are semiconductor diodes having a p-i-n structure in which the intrinsic I region is sensitive to ionizing radiation, particularly x rays and gamma rays. The thin contact technology is a main issue for charged particle detection. Paraport detects changes and generates interrupts when changes have been detected from high to low Moreover, the use of internal and external contacts of the crystal provides information on the interacting position:. Photo-resistors are connected to pins 10 and 11 here. So, it may be used in a large range of scientific and industrial applications such as:. The original design consisted of a close arrangement of four n type germanium detectors like a 4-leaf clover.